Produktionshalle
Loading...

CNC contract manufacturing backed by MAS machining expertise.

Turning, milling and surface grinding from a single source – from one-off parts to recurring production runs. Manufactured on modern CNC machining centers by experienced machinists who know exactly where dimensional accuracy matters.
Team Produktion
Loading...

The Manufacturing Arm of MAS

What begins at MAS as machining expertise is put into practice here: on modern CNC machining centers, by experienced machinists and with clearly structured processes.

Our customers rely on this experience. We know the materials, we know the machines, and we know where dimensional accuracy makes the difference. The result is a fully machined part that fits exactly as intended.

Everything for a Finished Part – From a Single Source.

Structured around what makes the difference: our core machining capabilities and the complementary processes that complete the job.

Core Capabilities

01

Turning

Complex turned parts with tight tolerances. One-off and series production with short setup times thanks to structured processes.

Machine DMG MORI NLX 2500 SY | 700
Technical data
Max. turning diameter
366 mm
Max. turning length
705 mm
Max. bar capacity
80 mm
Travel X / Y / Z
260 / 100 / 795 mm
Main spindle
max. 4,000 rpm, 18.5 kW
Counter spindle
max. 6,000 rpm, 11 kW
Driven tools
max. 10,000 rpm, 5.5 kW
Tool stations
12
Rapid traverse X / Y / Z
30 / 10 / 30 m/min
Control
MAPPS (Mitsubishi) with CELOS
02

Milling

5-axis machining for complex contours and precise hole patterns. Suitable for prototypes and recurring production runs.

Machine GROB G350
Technical data
Travel X / Y / Z
600 / 855 / 750 mm
Max. speeds X / Y / Z
70 / 45 / 90 m/min
Spindle
HSK-A63, max. 16,000 rpm
Interference diameter
600 mm
Table diameter
570 mm
Max. table load without / with pallet
400 / 340 kg
Total weight
15,300 kg
Tool length, single-disk magazine HSK-A63
365 mm
Tool length, double-disk magazine HSK-A63 (bottom / top)
365 / 180 mm
03

Surface Grinding

Precision-ground flat surfaces with defined surface roughness – wherever milled or turned surfaces are not sufficient.

Machine JUNG JF 520
Technical data
Clamping surface (L × W)
450 × 200 mm
Max. magnetic chuck size
450 × 200 mm
Max. grinding wheel dimensions
225 × 25 × 51 mm
Distance table to spindle center
350 (+50) mm
Table speed, reciprocating
1 to 20 m/min
Creep feed
0 to 500 mm/min
Grinding spindle speed
800 to 4,200 rpm
Grinding spindle power (with creep feed)
2.2 (3.5) kW
04

Complete Turn-Mill Machining

We manufacture complex parts requiring both turning and milling operations on our turn-mill center – complete 6-sided machining in a single setup, including 5-axis simultaneous machining via the B-axis. Fewer setups mean less tolerance stack-up, shorter lead times and one continuous process.

Machine DMG MORI NT 4250 DCG/1500 SZ
Technical data
Max. turning diameter
660 mm
Max. turning length
1,542 mm
Max. bar capacity
80 mm
Travel X / Y / Z
750 / 420 / 1,650 mm
B-axis
±120°, direct drive, 5-axis simultaneous
Chuck
10 inch
Main and counter spindle
max. 4,000 rpm, 22 kW each
Tool spindle
max. 12,000 rpm, 18.5 kW
Tool interface
Capto C6
Lower turret
12 stations
Tool magazine
40 tools
Control
MAPPS (Fanuc)

Complementary Processes

 

Laser Marking

Permanent part marking integrated directly into the manufacturing process. For traceability and mandatory identification requirements in regulated industries.

CAM Programming

We program based on existing part geometries, creating stable and reproducible NC programs that run directly on our machines.

Black Oxide Coating & Heat Treatment

Heat treatment and surface protection are part of the overall manufacturing process. We coordinate both through certified partners.

Simon
Loading...

Machines That Get the Job Done

Designed for precision parts in one-off and small-batch production. 

  1. GROB G350 (5-Axis Machining Center)
  2. DMG NLX 2500/700 (CNC Turning Center)
  3. DMG NT4250 DVCG 1500 SZ (5-Axis Turn-Mill Center)
  4. JUNG Surface Grinding Machine
  5. Laser Marking System

From Inquiry to Delivery

  1. 1

    Inquiry

    Send us your drawing or file – STEP, DXF or PDF.

  2. 2

    Quotation

    Feasibility assessment and pricing, provided promptly.

  3. 3

    Manufacturing

    Programming, setup and machining.

  4. 4

    Inspection

    Dimensional inspection and documentation.

  5. 5

    Delivery

    On time and fully machined.

MAS Produktion Ansprechpartner
Loading...

Send Us Your Drawing

We’ll check manufacturing feasibility and get back to you with a specific quote – from a single source, backed by MAS process expertise.